Technical Details
Fence Wire
- ISI standard confirmed High carbon, high tensile GI wires.
- Fence wire of 2.50 mm to 2.0 mm dia cold drawn HT galvanized wire
- Mass of zinc coating to measure between 230 grams per to 280 grams per sq.
meter. - Thickness of zinc coating 30 microns (minimum)
Insulators for Fence Post
- Confirmed High quality glass filled polyester plastic material made.
- Will be used for intermediate poles
- Will have very high breakdown voltage 15 KV minimum
- Confirms to 143R-111 Grade
Strain Insulator
- Confirmed High quality glass filled polyester plastic material made.
- Will be used for corner, section and end pole applications
- Will be made of high impact, high strength UV stabilized material
- Will have high breakdown voltage not less than 15 KV
- Confirms to 143R-111 Grade
Wire Strainer
- Confirmed strong, light weight corrosion resistant construction
- Will have gripples for tensioning the fence wire
Lead out Cable
- Confirmed for heavy Duty, high impact double insulated aluminum
alloy or fence core wire. The insulation thickness will be 1.00 mm
(approx) sheath thickness 0.90 mm (approx) - Lead out cable will be double insulated with outer insulation is fully
UV stabilized for abrasion resistance - The minimum breakdown voltage will be 15 KV
Earthing Kit
- Confirmed safety standard by provide effective earthing particularly
in difficult or poor earthing soils. (approx) sheath thickness 0.90 mm (approx) - It will comprise of a non-corrosive 8 mm x 4’ ht SS rod and Super Earth
Mix with high water holding capacity. - Will have Earth Clamps assembly for effective clamping
Joint Clamps
- Joint clamps will be used to join fence wires.
- Joint clamp will be made of standard M8 MS bolt and nut. Clamps will be
of CRCA steel spin / hot dip galvanized to zinc coating of minimum 30 microns.
Warning Sign Boards
- Will warn a person of the potential hazard & act as a visual deterrent
- Will of size 300 x 150 x 3 mm thick
- Warning sign boards will have warning in red / black radium lettering on high
visibility yellow background
Intermediate Poles
- 25mmx25mmx3mm “T” section Pole will be design according to the site
condition for full-fledged security. - Necessary Painting / Galvanizing can be done for esthetic look
Corner & End Pole
- Corner or End pole will be design according to the site condition for
full-fledged security. - Lead out cable will be double insulated with outer insulation is fully
UV stabilized for abrasion resistance - Necessary Painting / Galvanizing can be done for esthetic look
- Support pole also included
- 30 / 40 dia 25 dia supports
spryinnovations © 2011 copy rights - design Datarakshak
